Filter
Top Products
7.2 COPYING
Before copying
Document and paper handling
Before you begin making copies, please read the information of the document and paper
handling mentioned on pages 2.10 to 2.16.
Changing your machine to the Copy mode
Press the COPY
FAX
SCAN key until COPY light glow.
Display in the copy standby mode
Press COPY
FAX
SCAN to change the machine to the copy mode.
(For MFX-1330 model, Copy mode is the default standby mode.)
When the machine is in the Copy mode, the machine shows:
Copy Ready 01
Auto Ltr 100%
Number of copies
Zoom ratio
Recording paper size
Document size
To change the settings, refer “Basic copy settings” on page 7.4.
Memory overflow message
If you have stored too much information in your machine’s memory, a “Memory Over-
flow” message will appear on the LCD:
Memory Overflow
Start or Cancel
This appears because (1) too many pages have been stored in the memory, or (2) the
stored pages have too much information for your machine to remember.
If this message appears, press START to tell your machine to copy as many pages in
memory, or press
CANCEL to delete from memory all pages stored during the current
operation (but not previous operations).
NOTE:
If you do not operate your machine within 3 minutes, the machine will automatically print
the document stored in the memory during the current operation.