Filter
Top Products
3.10 AUTODIALER & DIALING OPTIONS
Erasing a call group
1
Press MENU, 1, 3, 2, ENTER.
2
Press or to select the call group you want to erase.
You can also select the call group by directly entering that two-digit identifier code
(01-32).
3
Press ENTER twice.
If you want to quit without erasing, press
CANCEL.
4
To erase another call group, repeat the procedure from step 2.
Otherwise, press
RESET to exit and return to the standby mode.
How to dial using a call group
Press this key twice.
Enter group number
.
Press Star
t.
This panel is of MFX-1330 model.
To perform the call group fax dialing
1
Switch to the Fax mode by pressing COPY
FAX
SCAN.
2
Place the document on the ADF or the document glass.
3
When you use the document glass, select the document size by pressing DOC. SIZE.
4
Adjust document resolution and contrast, if necessary.
5
Press SPEED DIAL /GROUP twice.
Enter Group No.
G_
6
Use the numeric keys to enter the two-digit call group number.
7
Press START.
• The machine will start the call group dialing.
NOTE: The document glass is available only for MFX-1330 model.