Muratec MFX-1330 All in One Printer User Manual


 
7.3COPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
COPYING
Making copies
Making copies using the ADF
1
Switch the machine to copy mode by pressing COPY
FAX
SCAN.
Copy Ready 01
Auto Ltr 100%
2
Place your document face up on the ADF and adjust document guides to the docu-
ment size.
3
As needed, set the copy settings including the
document type and scanning contrast,
number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7.4.
To clear the settings, press
RESET.
4
Press START to begin copying.
To stop copying, press
STOP.
Making copies using the Document glass
The document glass is available only for MFX-1330 model.
1
Switch the machine to copy mode by pressing COPY
FAX
SCAN.
Copy Ready 01
Auto Ltr 100%
2
Make sure that there is no document on the ADF. If a document is on the ADF, it
takes priority over the document on the document glass.
3
Place your document face down on the document glass and align it to the left upper
corner. Then close the platen cover.
4
Press DOC. SIZE to select the document size, Letter,
Half-letter
or Legal.
5
As needed, set the copy settings including the
document type and scanning contrast,
number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7.4.
To clear the settings, press
RESET.
6
Press START to begin copying.
To stop copying, press
STOP.