Filter
Top Products
CX2032 MFP User’s Guide Maintenance
114
7. Lift the right-hand end of the cartridge and then draw the
cartridge to the right to release the left-hand end as shown, and
withdraw the toner cartridge out of the image drum cartridge.
Place the cartridge on a piece of paper to avoid marking your
furniture.
Toner Out Out.eps
8. Take the new image drum cartridge out of its packaging and
place it on the piece of paper where the old cartridge was placed.
Keep it the same way round as the old unit. Pack the old
cartridge inside the packaging material for disposal.
9. Place the toner cartridge onto the new image drum cartridge as
shown. Push the left end in first, and then lower the right end in.
(It is not necessary to fit a new toner cartridge at this time unless
the remaining toner level is very low.)
Toner In Out.eps
10. Push the colored release lever (1) away from you to lock the
toner cartridge onto the new image drum unit and release toner
into it. Toner Close Out.eps
2
1
2
1
1