Filter
Top Products
CX2032 MFP User’s Guide Troubleshooting
148
Faxing is possible but the image of the document
printed by the remote machine is very poor.
If the faxed document has small type, complex illustrations, photos, or
is very light or very dark, try changing the fax quality and density
settings (See “Advanced operation” on page 88.). Copy the document
on the machine to determine how it will transmit. The problem may be
caused by telephone line interference. Try sending the document again
later.
Fax sent but received message was completely blank
Make sure that the document is loaded correctly before faxing; with text
face UP in the ADF or face DOWN on the glass.
Image of received fax is very poor
Try making a copy of a document on the local machine to make sure it
is working properly. If there is still a problem, contact the person
sending the fax and ask them to change their fax quality and density
settings. Ask the person to make a copy of the document on their
machine to ensure that it is working properly. Then ask them to send the
fax again.
Dialling was tried with a Speed Dial number but
nothing happened
Make sure that the Speed Dial number being used is programmed
correctly.
Local MFP will not answer the telephone or receive
faxes
First check to see that the power cord is connected properly. Also check
the reception mode setting of the machine. This MFP will not receive
faxes automatically if the manual receive mode is enabled (See “Manual
receive” on page 64.).