Filter
Top Products
CX2032 MFP User’s Guide Troubleshooting
142
(b) To remove a sheet from the central area of the belt (2),
carefully separate the sheet from the belt surface and
withdraw the sheet.
Jams 1.eps
(c) To remove a sheet just entering the fuser (3), separate the
trailing edge of the sheet from the belt, push the fuser
pressure release lever (4) towards the front and down to
release the fuser’s grip on the sheet, and withdraw the
sheet through the drum cavity area. Then allow the
pressure release lever to rise again.
NOTE
If the sheet is well advanced into the fuser (only a short length is
still visible), do not attempt to pull it back. Follow the next step to
remove it from the rear of the MFP.
2
4
3
1