Filter
Top Products
CX2032 MFP User’s Guide Configuring your machine
50
PCL emulation
ITEM CHOICE DESCRIPTION
Font Source
RESIDENT /
RESIDENT 2
Specifies the location of the PCL
default font. Normally this will be
INTERNAL unless additional fonts are
installed in the expansion ROM slot or
additional fonts have been
downloaded to RAM as permanent
fonts.
Font No. I0~I89
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
Font Pitch
0.44 CPI~10.00
CPI~99.99 CPI
Point size of selected default font.
Symbol Set PC-8
PCL symbol set. If the font source and
number are changed to one which
does not support the selected symbol
set, this must be changed to an
available symbol set for that font.
A4 Print
Width
78 COLUMN
80 COLUMN
Sets the number of columns subject
to Auto LF with A4 paper in PCL. This
is the value when Auto CR/LF Mode is
set to OFF with the 10CPI character.
White Page
Skip
OFF/ON
Selects whether blank pages are
printed or not.
CR Function CR / CR+LF
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
LF Function LF / LF+CR
Selects whether a received line feed
character (0Ah) also causes a
carriage return.
Print Margin
NORMAL
1/5 INCH (5.08 mm)
1/6 INCH (4.24 mm)
Sets the non-printable page area.
NORMAL is PCL compatible.
True Black OFF/ON
Selects whether black image data is
printed using black toner (ON) or
100% CMY (OFF). (Valid in PCL
emulation mode only.)
Pen Width
Adjust
ON/OFF
Tray ID#
MP Tray
1~4~59