Filter
Top Products
CX2032 MFP User’s Guide Getting started
21
For paper lengths exceeding 14 inches (356 mm) (Legal 14 in.) use
paper stock between 24 lb and 34 lb. (90 g/m² and 128 g/m²) and the
face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies.
Up to 50 sheets of transparencies or 10 envelopes can be loaded at one
time, subject to a maximum stacking depth of 0.3937 inches (10mm).
Watermarked or headed paper should be loaded print side up and top
edge into the MFP.
Face down stacker
The face down stacker on the top of the MFP can hold up to 250 sheets
of 20 lb (80 g/m²) standard paper and can handle paper stocks up to 32
lb. (120 g/m²). Pages printed in reading order (page 1 first) will be
sorted in reading order (last page on top, facing down).
Face up stacker
The face up stacker at the rear of the MFP should be opened and the tray
extension pulled out when required for use. In this condition paper will
exit via this path, regardless of driver settings.
The face up stacker can hold up to 100 sheets of 20 lb (80 g/m²)
standard paper, and can handle stocks up to 54 lb (203 g/m²).
Always use this stacker and the multi purpose feeder for paper stocks
heavier than 32 lb. (120 g/m²).