Filter
Top Products
Oct 02
7-2 Oki B6100 User Guide
About the 550 Sheet Feeder
About this Chapter
This chapter provides all of the information necessary to install, use, and maintain the 550 sheet
paper feeder option, including procedures for cleaning the feeder and removing paper jams.
NOTE: The printer automatically recognizes an option after the option is installed. The printer driver does
not. You must enable (activate) the option in the printer driver after the option is installed.
The steps you will follow vary according to both your operating system and your installed printer
driver. Here are the general steps you will follow.
Select the driver you want to work with.
Locate the printer properties section within the printer driver.
Use the pulldown window to select the option.
Activate the option.
About the 550 Sheet Feeder
The 550 sheet feeder is an optional single tray paper feeder that attaches under the printer. The
feeder holds a universal paper tray that accommodates a variety of print media and holds a max-
imum of 550 sheets of standard weight paper. The printer supplies all of the operating power
that is needed by the feeder, and motors and circuit boards internal to the feeder provide the
feeder with drive and operational logic.
At the start of a print run the feeder motor switches on and begins to feed a sheet of paper out of
a selected tray. Rubber rollers drive the sheet out of the tray, through the feeder, and into the
printer. Sensors monitor the progress of the paper as it travels through the feeder.
The 550 sheet feeder can be installed in the following configurations:
■ Printer and one 550 sheet feeder
■ Printer and two 550 sheet feeders