Filter
Top Products
Oct 02
Oki B6100 User Guide 3-9
Paper Menu
Paper Menu
NOTE: Settings in your software application will override any settings in your printer driver.
Your printer driver settings will override any settings from the printer menu or printer front panel.
The Paper Menu provides access to the printer settings for various paper-handling functions.
Use the following procedure to enter the paper menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Paper Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the Paper Menu.
4. Press the NEXT button to move through the submenus: Copies, Default Source, Manual
Feed, Output Tray, Media Size/Type, Tray Linking, Blank Pages, and Output Link-
ing.
5. Use the procedures in the following table to access and change the printer paper-handling
settings:
Submenus Default Setting Available Settings Procedure for Changing Setting
Copies
This submenu allows
you to change the
number of copies
printed.
1 Numbers 1 - 999 1. Press NEXT or PREVIOUS to
increase or decrease the number of
copies printed.
2. Press SELECT to save this setting.
Duplex
This submenu allows
you to turn the duplexer
on or off.
Off Off
On
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Duplex Bind
This submenu allows
you to define the
binding edge for
duplexed sheets.
Long Edge Long Edge
Short Edge
1. Press NEXT or PREVIOUS to toggle
between LONG EDGE and SHORT
EDGE.
2. Press SELECT to save this setting.
Default Source
This submenu allows
you to choose a default
paper source from a list
of all installed sources.
Tray 1 Front
Tray 1
Tray 2 (optional)
Tray 3 (optional)
1. Press NEXT or PREVIOUS to scroll
through the list of available sources of
paper.
2. Press SELECT to set a source as the
default.
Manual Feed
This submenu allows
you to turn the manual
feed on or off.
Off On
Off
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Output Tray
This submenu allows
you to choose a default
output tray from a list
of all installed output
trays.
Face Down Tray Face Down Tray
Offset Tray (optional)
1. Press NEXT or PREVIOUS to scroll
through the list of available output
trays.
2. Press SELECT to set a tray as the
default.