Filter
Top Products
Oct 02
Oki B6100 User Guide 9-5
Installing the Offset Catch Tray
Use the following procedure to install the offset catch tray:
1. Remove any cardboard inserts or packing tape from the interior and exterior of the offset
catch tray.
2. Turn the printer off by pressing [ O ] on the power switch on the front left of the printer,
and disconnect the power cord from the AC outlet.
NOTE: Installing the offset catch tray while the printer is on may damage the printer or the offset catch tray.
3. Squeeze the latch on the top left of the rear cover to release the cover, then open the rear
cover by pulling down on the top of the cover.