Filter
Top Products
Oct 02
9-18 Oki B6100 User Guide
Maintaining the Offset Catch Tray
Maintaining the Offset Catch Tray
The offset catch tray requires very little maintenance; however, with normal use you will need
to perform some routine maintenance tasks such as cleaning.
Cleaning the Exterior of the Offset Catch Tray
Through normal use the exterior of the offset catch tray may become dirty or stained with toner.
Although exterior dirt should not affect printer performance, an occasional exterior cleaning
may be necessary to maintain the appearance of the offset catch tray.
1. Turn the printer off by pressing [ O ] on the power switch on the right side of the printer.
2. Remove the plug of the AC power cord from the AC wall outlet.
3. Using a soft cloth, slightly damp with cold water, wipe the offset catch tray covers and
tray faces. Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.
4. Using a soft, dry cloth, thoroughly dry the covers and tray faces.
5. Insert the plug of the AC power cord into the AC wall outlet, and turn the printer on by
pressing [ I ] on the power switch on the right side of the printer.
CAUTION: Do not use solvents or abrasive cleaners to clean offset catch tray covers. Use only
cold water and a very mild soap to clean covers.