Filter
Top Products
Oct 02
9-2 Oki B6100 User Guide
About the Offset Catch Tray
About this Chapter
This chapter provides all of the information necessary to install, use, and maintain the Offset
Catch Tray, including procedures for cleaning and removing paper jams.
NOTE: The printer automatically recognizes an option after the option is installed. The printer driver does
not. You must enable (activate) the option in the printer driver after the option is installed.
The steps you will follow vary according to both your operating system and your installed printer
driver. Here are the general steps you will follow.
Select the driver you want to work with.
Locate the printer properties section within the printer driver.
Use the pulldown window to select the option.
Activate the option.
About the Offset Catch Tray
The offset catch tray (1) is an optional output tray that attaches to the top rear of the printer and
can hold up to 500 printed sheets, and also sorts printed sheets using an offset. The printer sup-
plies all of the operating power that is needed by the offset catch tray. Motors and circuit boards
internal to the offset catch tray provide it with drive and operational logic.
The offset catch tray can be installed with only the printer, or it may be installed with other
paper-handling options.
Figure 9-1: Offset Catch Tray installed with other paper handling options.
1