Filter
Top Products
Oct 02
Oki B6100 User Guide 7-5
Installing the 550 Sheet Paper Feeders
Installing One Paper Feeder
NOTE: The printer automatically recognizes an option after the option is installed. The printer driver does
not. You must enable (activate) the option in the printer driver after the option is installed.
The steps you will follow vary according to both your operating system and your installed printer
driver. Here are the general steps you will follow.
Select the driver you want to work with.
Locate the printer properties section within the printer driver.
Use the pulldown window to select the option.
Activate the option.
Use the following procedure to install one paper feeder:
1. Remove the 550 sheet paper feeder from its packaging and remove any cardboard inserts
and packing tape. Locate and set aside the small plastic bag containing three thumb-
screws.
2. Place the paper feeder on a sturdy, level surface.
NOTE: Do not move the printer once the paper feeder is installed.
WARNING: Before installing any options, turn the printer off by pressing [ O ] on the power
switch on the right side of the unit and disconnect the power cord from the AC outlet. These
precautions are necessary to avoid the risk of electric shock.