Filter
Top Products
Connections
32 - ENGLISH
Getting Started
Before connecting to the projector
z
Read carefully the instruction manual for the device to be connected.
z
Turn off the power switch of the devices before connecting cables.
z
If any connection cable is not supplied with the device, or if no optional cable is available for the connection of
the device, prepare a necessary system connection cable.
z
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In
this case, a time base corrector (TBC) must be connected.
z
The projector accepts video signals, S-video signals, analog RGB signals (with TTL sync. Level), and digital
signals.
z
Some computer models are not compatible with the projector.
z
Refer to “List of compatible signals” (
page 116) for the types of video signals that can be used with the
projector.
<S-VIDEO IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(1) (2)
(3) (4)
(1) GND (luminance signal)
(2) GND (color signal)
(3) Luminance signal
(4) Color signal
<COMPUTER IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(4) and (9) are not used.
(5) - (8), (10), and (11) are GND
terminals.
(10)(6) (10)(6)
(11) (15)
(1) (5)
(1) R/P
R
(2) G/G, SYNC/Y
(3) B/P
B
(12) DDC data
(13) HD/SYNC
(14) VD
(15) DDC clock
Connections