Filter
Top Products
[SECURITY] menu
76 - ENGLISH
Settings
[DISPLAY SETTING]
You can overlap the security message (text or image)
over the projecting image.
1) Press
to select [DISPLAY
SETTING].
2) Press
to switch [DISPLAY
SETTING].
z
The setting will change as follows each time
you press the button.
[OFF] [TEXT]
[USER
LOGO]
[OFF]
Disables the text/user logo
display.
[TEXT] Enables the text display.
[USER LOGO]
Projects the logo transferred with
“Logo Transfer Software”
*1
.
*1: “Logo Transfer Software” is included in the attached CD-
ROM.
Note
z
To create the image for [USER LOGO], “Logo
Transfer Software” included in the supplied CD-
ROM is required.
z
You cannot display both security message and
closed caption at the same time.
[TEXT CHANGE]
You can change the text displayed when the text
display is enabled by selecting [TEXT] in [DISPLAY
SETTING].
1) Press
to select [TEXT CHANGE].
2) Press the <ENTER> button.
z
The [TEXT CHANGE] screen is displayed.
3) Press
to select the text, and
press the <ENTER> button to enter the
text.
z
Up to 22 characters can be entered.
4) Press
to select [OK], and
press the <ENTER> button.
z
The text is changed.
[MENU LOCK]
You can set whether to display the menu and perform
the menu operation when you press the <MENU>
button.
1) Press
to select [MENU LOCK].
2) Press
to switch [MENU LOCK].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Disables the lock of the menu
operation.
[ON] Locks the menu operation.
Note
z
If an incorrect menu lock password is entered after
[MENU LOCK] is set to [ON], the menu operation is
disabled.
z
The [MENU LOCK] is set to [OFF] by default and
after you perform initialization.
z
The unlock status is maintained until the projector
is set to the standby mode.