Filter
Top Products
[SECURITY] menu
ENGLISH - 75
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and
select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 44) for the operation of the menu
screen.
z
When the projector is used for the rst time
Initial password: Press
in
order, and press the <ENTER> button.
z
After selecting the item, press
to set.
Attention
z
Make the settings after displaying the [SECURITY]
screen.
z
When the [SECURITY] screen is displayed,
entering a password is required. Enter the set
password and then continue operations.
z
When the password has been changed previously,
enter the changed password, and press the
<ENTER> button.
Note
z
The entered password is displayed with * mark on
the screen.
[PASSWORD]
You can set to display the security password entry
screen when the projection starts. If the correct
password is not entered, any operation other than the
power button operations becomes unavailable.
1) Press
to select [PASSWORD].
2) Press
to switch [PASSWORD].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Disables the security password
entry.
[ON]
Enables the security password
entry.
Note
z
The [PASSWORD] is set to [OFF] by default and
after you perform initialization.
z
Change the password periodically that is hard to
guess.
z
The security password will be enabled after setting
[PASSWORD] to [ON] and turning off the power
(standby mode).
[PASSWORD CHANGE]
You can change the security password.
1) Press
to select [PASSWORD
CHANGE].
2) Press the <ENTER> button.
z
The [PASSWORD CHANGE] screen is
displayed.
3) Press
and number (<1> - <6>)
buttons to set the password.
z
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the
conrmation.
6) Press the <ENTER> button.
Note
z
The entered password is displayed with * mark on
the screen.
z
An error message is displayed on the screen when
the entered password is incorrect. Re-enter the
correct password.
z
When numerals are used in the security password,
initialization of the security password will be
necessary if the remote control is lost. For the
method of initialization, consult your dealer.