Filter
Top Products
[PICTURE] menu
ENGLISH - 55
Settings
[TV-SYSTEM]
z
Only when the <S-VIDEO IN>/<VIDEO
IN> terminal is selected
The projector will automatically detect the input signal,
but if you input an unstable signal, you can set the
color system manually. Set the color system that
matches the input mode.
1) Press
to select [TV-SYSTEM].
2) Press
or press the <ENTER>
button.
z
The [TV-SYSTEM] screen is displayed.
3) Press
to select the color system.
z
The setting will change as follows each time
you press the button.
[AUTO] [NTSC] [NTSC4.43]
[PAL]
[SECAM] [PAL-N] [PAL-M]
Attention
z
Set it to [AUTO] normally.
z
Switch the setting to the color system for the TV
used.
Note
z
Setting [AUTO] will automatically select [NTSC],
[NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or
[PAL60].
[RGB/YC
B
C
R
]/[RGB/YP
B
P
R
]
Set it to [AUTO] normally. If images are not displayed
correctly when this is set to [AUTO], set either [RGB]
or [YC
B
C
R
], [YP
B
P
R
] in accordance with the input
signal.
1) Press
and select [RGB/YC
B
C
R
] or
[RGB/YP
B
P
R
].
2) Press
or press the <ENTER>
button.
z
The individual adjustment screen of [RGB/
YC
B
C
R
] or [RGB/YP
B
P
R
] is displayed.
3) Press
to switch the setting.
z
The setting will change as follows each time
you press the button.
[AUTO] [RGB]
[YC
B
C
R
]/
[YP
B
P
R
]
[AUTO]
The sync signal automatically
selects the signal [RGB]/[YC
B
C
R
]/
[YP
B
P
R
].
[RGB] Select it for RGB signal input.
[YP
B
P
R
] Select it for YP
B
P
R
signal input.
[YC
B
C
R
] Select it for YC
B
C
R
signal input.
When the <COMPUTER IN>
terminal is selected
z
For 525i (480i), 625i (576i), 525p (480p),
625p (576p), and VGA60 input
Select [AUTO], [RGB], or [YC
B
C
R
].
z
For other movie-based signal input
Select [AUTO], [RGB], or [YP
B
P
R
].
When the <HDMI IN 1>/<HDMI IN
2> terminal is selected
z
For 525p (480p) and 625p (576p) input
Select [AUTO], [RGB], or [YC
B
C
R
].
z
For other movie-based signal input
Select [AUTO], [RGB], or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 116) for
the signal details.
z
The signal selection may not function properly
depending on connected devices.
z
If the <COMPONENT IN> terminal is selected, the
setting cannot be congured.