Filter
Top Products
[NETWORK] menu
ENGLISH - 79
Settings
[NETWORK CONTROL]
You can set this function to control the projector from
a computer connected via the network.
1) Press
to select [NETWORK
CONTROL].
2) Press
to switch [NETWORK
CONTROL].
z
Each time you press the button, the settings
change as follows.
[ON] [OFF]
[ON]
Enables the control function from
a computer connected via the
network.
[OFF]
Disables the control function from
a computer connected via the
network.
[STATUS]
You can display the network status of the projector.
1) Press
to select [STATUS].
2) Press the <ENTER> button.
z
The [STATUS] screen is displayed.
[INITIALIZE]
You can restore the network settings to the factory
default settings.
1) Press
to select [INITIALIZE].
2) Press the <ENTER> button.
z
[INITIALIZE] is displayed.
Note
z
The security password entry is required if you have
set [ON] in the [SECURITY] menu
→
[PASSWORD]
(
page 75).
3) Press
to select [OK], and press
the <ENTER> button.