Filter
Top Products
[NETWORK] menu
ENGLISH - 87
Settings
[Adjust clock] page
Click [Detailed set up]
→
[Adjust clock].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Time Zone]
Selects the time zone. (Factory default: GMT +09:00)
(2) [Set time zone]
Updates the time zone setting.
(3) [NTP SYNCHRONIZATION]
Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME]
Enter the IP address or server name of the NTP server
when you set to adjust the date and time manually.
(To enter the server name, the setup of the DNS server is
required.)
(5) [Date]
Enter the date to be changed.
(6) [Time]
Enter the time to be changed.
(7) [Set date and time]
Updates the date and time settings.
Note
z
The replacement of the battery inside the projector is required when the time goes out of alignment right after
correcting the time. Consult your dealer.