Filter
Top Products
About your projector
ENGLISH - 21
Preparation
Remote control
(15)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(16)
(1) Remote control indicator
Flashes by pressing any buttons.
(2) Power
button
Sets the projector to the standby mode when the <MAIN POWER> switch on the
projector is set to <ON>. Starts projection when the projector power is off and in the
standby mode.
(3) Input selection (<COMPUTER>, <COMPONENT>, <VIDEO/S-VIDEO>, and <HDMI
1/2>) buttons
Switches the input signal to project. (
page 42)
Used to set the ID number of the remote control and a security password. (
page 24)
(4) <MENU> button
Displays the main menu screen. (
page 44)
(5) <FREEZE> button
Used to temporarily freeze the image and turn off sound. (
page 41)
(6) <DEFAULT> button
Restores the contents of the sub-menu to the factory default setting. (
page 45)
(7) <FUNC1> to <FUNC3> buttons
Assigns a frequently used operation and use as a shortcut button. (
page 43)
(8) <ID SET> button
Sets the ID number of the remote control when the system uses multiple projectors.
(
page 24)
(9) <ID ALL> button
Simultaneously controls all the projectors with one remote control when the system uses
multiple projectors. (
page 24)
(10)<AUTO SETUP> button
Automatically adjusts [SHIFT], [DOT CLOCK], and [CLOCK PHASE] when computer
signal is input.
(11)
buttons/<RETURN> button/<ENTER> button
Used to operate the menu screen.
Also used to enter the password for [SECURITY] or to enter characters.
(12)<AV MUTE> button
Used to temporarily turn off the image and sound. (
page 41)
(13)<ECO> button
Displays the setting screen for the ECO management. (
page 43)
(14)<VOLUME +>/<VOLUME
-
> button
Adjusts the volume of the audio output. (
page 43)
(15)Remote control signal transmitter
(16)Strap hole
Attach a strap onto the remote control for your convenience.
Attention
z
Do not drop the remote control.
z
Avoid contact with liquids or moisture.
z
Do not attempt to modify or disassemble the remote control.
z
When strap is attached to the remote control, do not ing the remote control while holding the strap.
Note
z
The remote control can be used within a distance of about 15 m (49'2") if pointed directly at the remote control
receiver. The remote control can control at angles of up to ±15° vertically and ±30° horizontally, but the effective
control range may be reduced.
z
If there are any obstacles between the remote control and the remote control signal receptor, the remote
control may not operate properly.
z
The signal will be reected off the screen. However, the operating range may differ due to the screen material.
z
If the remote control signal receptor receives strong light such as uorescent light directly, the remote control
may not operate properly. Use it in a place distant from the light source.
About your projector