Filter
Top Products
[PROJECTOR SETUP] menu
72 - ENGLISH
Settings
[AUDIO SETTING]
Displays the details of the audio functions.
1) Press
to select [AUDIO SETTING].
2) Press the <ENTER> button.
z
The [AUDIO SETTING] screen is displayed.
3) Press
to select an item, and
press
to adjust levels or change
settings.
[VOLUME]
Adjusts the volume of the speaker.
Operation Adjustment Range
Press
.
Increases the
volume.
Maximum
value 63
Press
.
Decreases the
volume.
Minimum
value 0
[BALANCE]
You can adjust the balance of left/right audio output.
Operation Adjustment Range
Press
.
Increases the
volume from the
right.
L16 to R16
Press
.
Increases the
volume from the
left.
[IN STANDBY MODE]
You can set the audio output during the standby.
z
The setting will change as follows each time you
press the button.
[OFF] [ON]
[OFF]
Disables audio output during the
standby.
[ON]
Enables audio output during the
standby.
Note
z
You cannot enable sound output during standby
if [STANDBY MODE] (
page 70) of [ECO
MANAGEMENT] is set [ECO].
[AUDIO IN SELECT]
You can select the audio input from connected
external equipment.
z
The setting will change as follows each time you
press the button.
z
To set [HDMI 1]
[HDMI 1 AUDIO IN] [AUDIO IN]
[HDMI 1 AUDIO IN]
Outputs HDMI 1 audio when the
HDMI 1 input is selected.
[AUDIO IN]
Outputs audio from the device
connected to the <AUDIO IN>
terminal when the HDMI 1 input is
selected.
z
To set [HDMI 2]
[HDMI 2 AUDIO IN] [AUDIO IN]
[HDMI 2 AUDIO IN]
Outputs HDMI 2 audio when the
HDMI 2 input is selected.
[AUDIO IN]
Outputs audio from the device
connected to the <AUDIO IN>
terminal when the HDMI 2 input is
selected.
Note
z
Sound is output from the device connected to the
<AUDIO IN> terminal when you have set an input
selection item other than [HDMI 1] or [HDMI 2].