Filter
Top Products
[DISPLAY OPTION] menu
ENGLISH - 63
Settings
[HDMI SIGNAL LEVEL]
You can switch the setting when the projector is
connected to an external equipment via HDMI cable
and the image is not projected correctly.
1) Press
to select [HDMI SIGNAL
LEVEL].
2) Press
to switch [HDMI SIGNAL
LEVEL].
z
The setting will change as follows each time
you press the button.
[0-1023] [64-940]
[0-1023]
Select when the HDMI terminal
and DVI-D output terminal of an
external equipment (computer,
etc.) is connected to the <HDMI
IN 1>/<HDMI IN 2> terminal of
the projector using a conversion
cable, etc.
[64-940]
Select when the HDMI output
terminal of an external equipment
(DVD player, etc.) is connected
to the <HDMI IN 1>/<HDMI IN 2>
terminal of the projector.
Note
z
The optimal setting is different depending on the
output setting of the connected external equipment.
Refer to the instruction manual of the external
equipment regarding the output of the external
equipment.
[CLOSED CAPTION SETTING]
z
Only for NTSC, 525i (480i) input
Set the closed caption display as follows.
1) Press
to select [CLOSED
CAPTION SETTING].
2) Press the <ENTER> button.
z
The [CLOSED CAPTION SETTING] screen is
displayed.
3) Press
to select an item, and press
to change the setting.
[CLOSED CAPTION]
Set whether or not to display the closed caption.
z
The setting will change as follows each time you
press the button.
z
When you set the function to [ON], a conrmation
message [If the input matches the CC type
selected,] [the SECURITY TEXT/LOGO will not be
displayed.]appears. Select [OK] or [CANCEL] and
press the <ENTER> button. You cannot set [ON] if
[CANCEL] is selected.
[OFF] [ON]
[OFF] Hides the closed caption.
[ON] Displays the closed caption.
[MODE]
Selects a closed caption mode.
z
The setting will change as follows each time you
press the button.
[CC1] [CC2]
[CC4] [CC3]
[CC1] Displays CC1 data.
[CC2] Displays CC2 data.
[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
z
The closed caption is a function mainly used in the
north America, and it shows the text information
contained in the image signal. Closed captions may
not be displayed on some devices or contents.
z
Security messages set in the [SECURITY] menu
→
[DISPLAY SETTING] (
page 76) are not displayed
when the closed caption signal of the selected
mode is input.
z
Part of characters may not be displayed when high
compensation values are set in [KEYSTONE].
z
Closed captions are not displayed while the menu
screen is displayed.