Filter
Top Products
Remote control operation
ENGLISH - 43
Basic Operation
Using the Function button
The <FUNC1> to <FUNC3> buttons on the remote
control can be assigned to any frequent operations to
be used as shortcut buttons.
FUNC1 FUNC2 FUNC3
button
Press the <FUNC1> to <FUNC3> button
on the remote control.
To assign functions to the
<FUNC1> to <FUNC3> buttons
1) Press the <MENU> button on the
remote control or the projector to
select a menu option (main menu, sub-
menu, or advanced menu).
z
Refer to “Navigating through the menu”
(
page 44) for on-screen menu operations.
2) Hold down any of the <FUNC1> to
<FUNC3> buttons on the remote
control for at least three seconds.
Note
z
When the setting is complete, the assigned menu
item appears on the right of the remote control
operation guidance area on the lower part of the
menu screen.
Using the ECO management
function
Displays the setting screen for the ECO management.
button
Press the <ECO> button on the remote
control.
Note
z
For details, refer to the [PROJECTOR SETUP]
menu
→
[ECO MANAGEMENT] (
page 69).
Resetting to the factory
default
Returns the settings for sub-menu or adjustment
values to the factory default.
button
Press the <DEFAULT> button on the
remote control.
Note
z
Refer to “To reset to the factory default” (
page 45)
for details.
Adjusting the volume
Adjusts the volume of the audio output.
button
Press the <VOLUME +> or <VOLUME
-
>
button on the remote control.
<VOLUME +> Increases the volume.
<VOLUME
-
> Decreases the volume.