Filter
Top Products
[PROJECTOR SETUP] menu
ENGLISH - 71
Settings
[EMULATE]
When using the control commands for one of our
projectors that you have previously purchased
to control this projector using a computer via its
<SERIAL> input terminal, set up the function as
follows. This will allow you to use the control software
etc. designed for our existing projectors.
1) Press
to select [EMULATE].
2) Press the <ENTER> button.
z
The [EMULATE] individual adjustment screen
is displayed.
3) Press
to select an item.
[DEFAULT] LZ370 series
[D3500] D3500 series
[D4000] D4000 series
[D/W5k series]
DX800 series, DW730 series,
D5700 series, DW5100 series,
D5600 series, DW5000 series,
D5500 series
[D/W/Z6k
series]
DZ6710 series, DZ6700 series,
DW6300 series, D6000 series,
D5000 series, DZ570 series,
DW530 series, DX500 series
[L730]
L730 series, L720 series,
L520 series
[L780] L780 series, L750 series
[L735] L735 series
[L785] L785 series
[LB/W series]
LB3 series, LB2 series,
LB1 series, ST10 series,
LB90 series, LW80NT series,
LB80 series, LB75 series
[F/W series]
FW430 series, FX400 series,
FW300 series, F300 series,
F200 series, FW100 series,
F100 series
4) Press the <ENTER> button.
Note
z
Refer to “<SERIAL> terminal” (
page 113).
[FUNCTION BUTTON]
The functions assigned to the <FUNC1> to <FUNC3>
buttons are displayed. You can also release the
assignment settings.
To cancel assigned functions
to the <FUNC1> to <FUNC3>
buttons
1) Press
to select [FUNCTION
BUTTON].
2) Press the <ENTER> button.
3) Press
to select [DISABLE] for a
function button (F1 to F3) you want to
release the assignment.
4) Press the <ENTER> button.
5) When the conrmation message is
displayed, select [OK] and press the
<ENTER> button.