Filter
Top Products
[PICTURE] menu
48 - ENGLISH
Settings
Select [PICTURE] from the main menu, and
select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 44) for the operation of the menu
screen.
z
After selecting the item, press
to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable
for the image source and the environment in which
the projector is used.
1) Press
to select [PICTURE MODE].
2) Press
or press the <ENTER>
button.
z
The [PICTURE MODE] individual adjustment
screen is displayed.
3) Press
to switch [PICTURE MODE].
z
The setting will change as follows each time
you press the button.
[STANDARD] [DYNAMIC]
[BLACKBOARD]
[CINEMA]
*1
[NATURAL]
*2
[DICOM SIM.]
[WHITE BOARD]
*1: When movie-based signals are input
*2: When still image signals are input
[STANDARD]
The picture becomes suitable for
moving images in general.
[DYNAMIC]
The light output is maximized for
use in bright areas.
[BLACKBOARD]
The picture becomes suitable for
projecting on a black board.
[WHITE
BOARD]
The picture becomes suitable for
projecting on a white board.
[DICOM SIM.]
*1
The picture becomes similar to
that of DICOM Part 14 Grayscale
Standard.
[CINEMA]
The picture becomes suitable for
movie sources.
[NATURAL] The picture complies with sRGB.
*1: Set the items other than [PICTURE MODE] to the factory
default.
Note
z
The factory default picture modes are [DYNAMIC]
for still image input signals and [STANDARD] for
movie-based input signals.
z
DICOM, the abbreviation of “Digital Imaging and
Communication in Medicine”, is a standard for
medical imaging technology. Although the name
DICOM is used in the setting item, this projector
is not for a medical use. Do not use the projected
images for diagnostic purposes.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press
to select [CONTRAST].
2) Press
or press the <ENTER>
button.
z
The [CONTRAST] individual adjustment screen
is displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Brightens the
screen and makes
the color of image
deeper.
Maximum
value +64
Press
.
Darkens the screen
and makes the
color of image
lighter.
Minimum
value
-
64
Attention
z
Adjust [BRIGHTNESS] rst when you need to
adjust [BRIGHTNESS] and [CONTRAST].
[PICTURE] menu