Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
INSTALLING THE MP.11/a
The MP.11/a supports two power methodsan AC power outlet and Active Ethernet. The power supply
accepts an input AC voltage in the range of 100-240 VAC.
The installation procedure on page 11 provides instructions for attaching both the power and Ethernet
connectors. In situations without an external antenna (for example, during a desk tryout), the antenna
cable is not required.
WARNING!
For your own safety, use only the power cord supplied with the unit. The metal case of the
MP.11/a must be grounded through the ground connection that is provided on the metal case.
The antenna grounding, the surge arrestor, and the MP.11/a housing must be bonded together
and grounded in one location to avoid ground current loops.
The Product Package
Each MP.11/a comes with the following:
▪ One metal base for ceiling or desktop mounting (includes two screws)
▪ Mounting hardware
º Four 3.5 mm x 40 mm screws
º Four 6 mm x 35 mm plugs
▪ One power supply
▪ One Tsunami MP.11/a Installation CD-ROM containing:
º Software Installation Package (starts automatically when CD is inserted in CD-ROM drive; can
be started by double-clicking SETUP.EXE).
º Online Help
º Documentation (Quick Install Guide, Installation and Management Guide, Antenna Installation
Manual)
º ScanTool (a utility with which you can obtain or set the IP address of the MP.11/a for access;
see “ScanTool” for more information).
º TFTP Server (which lets you transfer files across the network). You can download configuration
files as well as image files for embedded software upgrades, and you can upload files from the
MP.11/a for backup. Here downloading means transferring files to the MP.11/a and uploading
means transferring files in the opposite direction.
Note: All software CD-ROMs that come with your Tsunami products include a readme.txt or
readme.html file. This file contains information about the software version and drivers. You are
advised to print and read the readme file prior to installing your Tsunami products, as it may
contain additional information that was not available when this document was printed.
Chapter 2. Installation 10
CPN 65755 Issue Date: August 2003