Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
Basic CLI Management Commands
Task
Commands
Set System Name,
Location, and
Contact information
show system
set sysname <name>
set sysloc <location>
set sysactname <contact name>
set sysctemail <contact email>
set sysctphone <contact phone>
Set IP address for
the MP.11/a
set ipaddrtype <static | dynamic>
set ipaddr 1 ipaddress <ip address>
set ipaddr 1 ipsubmask <subnet mask>
set ipaddr 1 ipgw <gateway IP address>
For example:
set ipaddr 1 ipaddress <ip address> ipsubmask <subnet mask>
Configure Wireless
Interface
set wif 3 channel 10
set wif 3 netname <network name>
Configure Ethernet
Interface
show ethernet
show ethermacaddr
set Ethernet 1 etherspeed <autospeedauto | autospeedhalf |
100auto | 100full | 100 half | 10full | 10half>
Set Encryption for
the Wireless
interface
show wifsec
set wifsec 3 encryptkeytx <1-4>
set wifsec 3 encryptkey1 <key 1>
set wifsec 3 encryptallowdeny <enable | disable>
Set Telnet
Password
show telnet
set tellogintout <login timeout>
set telport <port number>
set telsessions <maximum number of sessions>
set telsessiontout <inactivity timeout>
Set Web Interface
Password
show http
set httppasswd <password>
set httpport <port number>
set httpstatus <0-15>
Set SNMP
Password
show snmp
set snmprpasswd <read password>
set snmprwpasswd <read/write password>
set snmpstatus <0-15>
Download an
MP.11/a
configuration file
from your TFTP
server
set tftpfilename <file name> <tftpfiletype config tftpipaddr <IP
address of your TFTP server>
show tftp
(to ensure the entries are correct)
download *
reboot 0
Backup your
MP.11/a
configuration file
upload <TFTP Server IP address> <tftpfilename(such as
“config.sys”)> config
show tftp
(to ensure the entries are correct)
upload *
Reboot
reboot [<number of seconds>]
Reset to Factory
Defaults
set sysresettodefaults 1
Chapter 6. Command Line Interface 87
CPN 65755 Issue Date: August 2003