Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
RADIUS Authentication
Click the Configure button, the Security tab, and the Radius Auth sub-tab to set the IP address of the
RADIUS server containing the central list of MAC addresses allowed to access the network.
In large networks with multiple MP.11/a devices, you can maintain a list of MAC addresses on a
centralized location using a RADIUS authentication server that grants or denies access. If you use this
kind of authentication, you must specify at least the primary RADIUS server. The backup RADIUS
server is optional.
Encryption
You can protect the wireless data link by using encryption. Encryption keys can be 5 (64-bit), 13 (WEP
128-bit), or 16 (AES 128-bit) characters in length. Both ends of the wireless data link must use the
same parameter values. Advanced Encryption Standard (AES) encryption is supported on the MP.11a
only.
Click the Configure button, the Security tab, and the Encryption sub-tab to set encryption keys for the
data transmitted and received by the MP.11/a. Note that all devices in one network must use the same
encryption parameters to communicate to each other.
Chapter 5. Web Interface 60
CPN 65755 Issue Date: August 2003