Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
2. Select the MP.11/a for which you want to set the IP address and click Change. The Change dialog
window is displayed, as shown in the following window.
3. Ensure that Static is selected as the IP Address Type and fill in the IP Address and Subnet Mask
suitable for the LAN subnet to which the MP.11/a is connected.
4. Enter the Read/Write Password (the default value is public) and click OK to confirm your changes.
The respective MP.11/a reboots to make the changes effective.
Note: The asterisks displayed when you enter the password are a set number that does not
necessarily equal the number of characters in the actual password string. This is intended for
added security.
Dynamic IP Address with DHCP
To obtain the IP address:
1. Run ScanTool on a computer connected to the same LAN subnet as the MP.11/a, or directly
connected to the MP.11/a with a cross-over Ethernet cable.
2. Locate the MP.11/a for which you want to obtain the IP address. You can find the current IP
address in the IP Address column.
The MP.11/a initially is set with a static IP address of 10.0.0.1.
Chapter 3. Management Overview 21
CPN 65755 Issue Date: August 2003