Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
9) IP Routes
Click the Monitor button and the IP Routes tab to view all active IP routes of the MP.11/a. These can
be either static or dynamic (obtained through RIP). This tab is available only in Router mode, and you
can add routes only when in Router mode.
10) Learn Table
Click the Monitor button and the Learn Table tab to view all MAC addresses the MP.11/a has detected
on an interface. The Learn Table displays information relating to network bridging. It reports the MAC
address for each node that the device has learned is on the network and the interface on which the node
was detected. There can be up to 10,000 entries in the Learn Table. This tab is only available in
Bridge mode.
Chapter 5. Web Interface 75
CPN 65755 Issue Date: August 2003