Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
The MP.11/a either obtains its IP address automatically through DHCP or it must be set manually. With
ScanTool, you can find out the current IP address of the MP.11/a and, if necessary, change it so that is
appropriate for your network.
The MP.11/a is shipped with the static IP address 10.0.0.1 configured.
Setting the IP Address Manually
If you want to set the IP address manually:
1. Run ScanTool on a computer connected to the same LAN subnet as the MP.11/a, or directly
connected to the MP.11/a with a cross-over Ethernet cable.
ScanTool scans the subnet for MP.11/a units and displays the units it finds in the main window. The
following figure shows an example of the main window. If necessary, click Rescan to re-scan the
subnet and update the display.
Chapter 3. Management Overview 20
CPN 65755 Issue Date: August 2003