Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
IP CONFIGURATION
The IP Configuration window lets you change the MP.11/a IP parameters. These settings differ when
the MP.11/a is in Router mode.
To go to this page, click the Configure button, the Network tab, then the IP Configuration sub-tab.
If the device is configured in Bridge mode, you can set the following parameter:
IP Address Assignment Type
Select Static if you want to assign a static IP address to the MP.11/a; select Dynamic to have the
device run in DHCP client mode, which gets an IP address automatically from a DHCP server over
the network. If you do not have a DHCP server or if you want to manually configure the IP settings,
set this parameter to Static.
You can set the following remaining parameters only when the IP Address Assignment Type is set to
Static.
IP Address
The static IP address of the MP.11/a (default IP address is 10.0.0.1).
Subnet Mask
The mask of the subnet to which the MP.11/a is connected (default subnet mask is 255.0.0.0).
Default Router IP Address
The IP address of the default gateway.
Default TTL
The default time-to-live value.
Chapter 4. Basic Management 33
CPN 65755 Issue Date: August 2003