Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
4) Reset
Click the Commands button and the Reset tab to restore the configuration of the MP.11/a to the factory
default values.
You can also reset the MP.11/a from the RESET button located on the side of the unit. Because this
resets the MP.11/a’s current IP address, a new IP address must be assigned.
CAUTION: Resetting the MP.11/a to its factory default configuration permanently overwrites all
changes made to the unit. The MP.11/a reboots automatically after this command
has been issued.
5) Help Link
Click the Commands button and the Help Link tab to set the location of the help files of the Web
Interface. If the help files cannot be found, pressing the ? button results in an error message. Upon
installation, the help files are installed in the C:\Program Files\Proxim\Tsunami MP.11/a folder.
If you want to place these files on a shared drive, copy the Help folder to the new location and specify
the new path in the Help Link box.
Chapter 5. Web Interface 78
CPN 65755 Issue Date: August 2003