Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
Passwords
Access to the MP.11/a is protected with passwords. The default password is public.
Note: The asterisks displayed when you enter a password are a set number that does not necessarily
equal the number of characters in the actual password string, which is intended for added
security.
Changing the Telnet Password
To change the telnet password, click the Configure button and the Telnet tab.
Enter the new password in the Password field; repeat it in the Confirm field and click OK.
Changing the Web Interface Password
To change the password of the Web Interface, click the Configure button and the HTTP tab.
Enter the new password in the Password field; repeat it in the Confirm field and click OK.
Changing the SNMP Password
You can set a read and a read-and-write password for SNMP. The password used during login
determines the type of access.
You can change these passwords as follows:
1. Click the Configure button and the SNMP tab.
2. Enter the new password in the Password field.
3. Repeat the new password in the Confirm field.
4. Click OK when you are done.
UPGRADING THE MP.11/a
The MP.11/a is equipped with embedded software that can be updated when new versions are
released. Updates can be found on our website. Go to http://www.proxim.com/
, choose Tsunami
MP.11 from Products, and click Downloads.
Updating the embedded software is described in “Image File Download” on page 104. A TFTP server is
provided on the Tsunami MP.11/a Documentation and Software CD-ROM; the server is required to
transfer the downloaded file to the MP.11/a.
Chapter 4. Basic Management 41
CPN 65755 Issue Date: August 2003