Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
Storm Threshold
Click the Configure button, the Filtering tab, and the Storm Threshold sub-tab to prevent
broadcast/multicast overload.
Storm Threshold is an advanced Bridge setup option that you can use to protect the network against
data overload by specifying:
▪ A maximum number of frames per second as received from a single network device (identified by its
MAC address).
▪ An absolute maximum number of messages per port.
The Storm Threshold parameters let you specify a set of thresholds for each port of the MP.11/a,
identifying separate values for the number of broadcast messages per second and multicast messages
per second.
When the number of frames for a port or identified station exceeds the maximum value per second, the
MP.11/a ignores all subsequent messages issued by the particular network device, or ignores all
messages of that type.
Per Address Threshold
Enter the maximum allowed number of packets per second.
Ethernet Threshold
Enter the maximum allowed number of packets per second.
Wireless Threshold
Enter the maximum allowed number of packets per second.
Chapter 5. Web Interface 64
CPN 65755 Issue Date: August 2003