Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
SYSTEM PARAMETERS
MP.11/a System Information
system R
System group
sysname RW
Name
sysmode RW
Mode [1=bridge, 2=router]
sysloc RW
Location
sysctname RW
Contact name
sysctemail RW
Contact email
sysctphone RW
Contact phone
sysdescr R
Description
sysoid R
OID
sysservices R
Services
sysuptime R
Up time
sysflashbckint RW
Flash backup interval (seconds)
sysflashupdate RW
Flash update [1=write flash]
sysresettodefaults RW
Resets to factory defaults. [1=reset and immediate reboot]
Example: This command sets the MP.11/a to Router mode:
set sysmode 2
TELNET PARAMETERS
Telnet Port Setup
telnet R
Telnet Group
telifbitmask RW
Telnet interface bitmap
telsessions RW
Telnet sessions [0-5=max number of telnet sessions]
telport RW
Telnet port
tellogintout RW
Telnet login timeout (seconds)
telsessiontout RW
Telnet session timeout (seconds)
Example: This command changes the login timeout and the session timeout.
set tellogintout 200 telsessiontout 1800
TFTP PARAMETERS
Setup for File Transfers
tftp R
TFTP Group
tftpfilename RW
TFTP file name
tftpfiletype RW
TFTP file type
tftpipaddr RW
TFTP Server IP address
Chapter 6. Command Line Interface 94
CPN 65755 Issue Date: August 2003