Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
Show and Set Parameter Examples
Set the IP
address
parameter
Syntax:
set <parameter name> <parameter value>
Example:
set ipaddr 10.0.0.12
Create a
table row or
entry
Syntax:
set <table name> <table index> <element 1> <value 1> … <element
n> <value n>
Example:
set mgmtipaccesstbl 0 ipaddr 10.0.0.10 ipmask 255.255.0.0
Modify a
table entry
or row
Examples:
set mgmtipaccesstbl 1 ipaddr 10.0.0.11
set mgmtipaccesstbl 1 ipaddr 10.0.0.12 ipmask 255.255.255.248
cmt “First Row”
Show the
group
parameters
Syntax:
show <group name>
Example:
show network
Show
individual
and table
parameters
Syntax:
show <parameter name> show <table name>
Examples:
show ipaddr show mgmtipaccesstbl
Enable,
disable, or
delete a
table entry
or row
Syntax:
set <Table> index status <enable, disable, delete>
set <Table> index status <1=enable, 2=disable, 3=delete>
Examples:
set mgmtipaccesstbl 2 status enable
set mgmtipaccesstbl 2 status disable
set mgmtipaccesstbl 2 status delete
set mgmtipaccesstbl 2 status 2
Table Parameters
In some cases, parameters are stored in tables whose rows contain similar parameters. Command
arguments involving tables have the following syntax:
<table name> <row> <parameter 1 name> <value 1> … <parameter n name> <value n>
Every table parameter supported in the MP.11/a CLI and an example of a row entry for that table are
listed in the following table.
Chapter 6. Command Line Interface 97
CPN 65755 Issue Date: August 2003