Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
WIRELESS INTERFACE PARAMETER
Configure wireless settings
wif RW
Wireless Interface Group
index R
Index [3]
netname RW
Network name
satden RW
Satellite density (1=large, 2= medium, 3=small, 4=mini, 5=micro]
interrobust RW
Interference Robustness [1=enable, 2=disable]
dtimperiod RW
DTIM period
autochannel RW
Auto channel select status [1=enable, 2=disable]
channel RW
Frequency channel
medres RW
RTS/CTS Medium Reservation
multrate RW
Multicast rate (megabits per second)
[1=1, 2=2, 3=5.5, 4=11, 5=6, 6=9, 7=12, 8=18, 9=24, 10=36,
11=48, 12=54, 13=72, 14=96, 15=108]
countrycode RW
Country code [see Country Code table]
dfsstatus RW
DFS status [1=enable, 2=disable]
tpcmode RW
TPC mode [1=half, 2=quarter, 3=eighth, 4=min, 5=full]
closedsys RW
Closed system [1=enable, 2=disable]
ldbalance RW
Load balancing [1=enable, 2=disable]
meddendistrib RW
Medium Density Distribution [1=enable, 2=disable]
macaddr R
MAC address
suppdatarates R
Supported data rates
suppchannels R
Supported channels
phytype R
Physical layer type
regdomain R
Regulatory Domain List
txrate RW
Transmit rate [0=auto fallback, 1-255=(<value>/2) megabits per
second]
wifrxbwlimit RW
Incoming bandwidth limit
wiftxbwlimit RW
Outgoing bandwidth limit
turbomode RW
Turbo mode [1=enable, 2=disable]
opermode R
Operational mode
preambletype R
Preamble type
protmech R
Protection mechanism status
Example: This command disables closed system and enables turbo mode.
set wif 3 closedsys 2 turbomode 1
Chapter 6. Command Line Interface 95
CPN 65755 Issue Date: August 2003