Filter
Top Products
Tsunami MP.11and MP.11a Installation and Management
INSTALLING DOCUMENTATION AND SOFTWARE
The MP.11/a also comes with documentation and software on a CD-ROM.
To install the documentation and software on a computer or network:
1. Place the CD-ROM in a CD-ROM drive. The installer normally starts automatically. You can also
start the installer manually by running the setup.exe program in the root directory of the CD-ROM.
2. Click the Install Help and Software button and perform the necessary steps.
The CD-ROM contains the following documentation and software:
Online help
This is the help for the Web Interface. It is stored on your computer or network so it is always
available. The help is launched by clicking the question mark button in the Web Interface.
Documentation
Documentation also is available in an electronic (PDF) form, including the Tsunami MP.11/a
Installation and Management Guide, Tsunami MP.11/a Antenna Installation Guide, and Tsunami
MP.11/a Quick Install Guide.
ScanTool
The ScanTool program is a utility with which you can obtain or set the IP address of the MP.11/a for
management access. See “Setting the IP Address Manually” on page 20 for details.
TFTP server
The TFTP (Trivial File Transfer Protocol) server lets you transfer files across the network. You can
download configuration and license files, as well as image files for embedded software upgrades,
and you can upload files from the MP.11/a for backup. Here downloading means transferring files to
the MP.11/a and uploading means transferring files in the opposite direction.
MOUNTING THE MP.11/a
The following are the mounting options for the MP.11/a:
▪ Desktop Mount
▪ Wall Mount
▪ Ceiling Mount
Desktop Mounting
This procedure consists of attaching the metal base to the MP.11/a unit. See “Installation Procedure” on
page 11.
Chapter 2. Installation 16
CPN 65755 Issue Date: August 2003