Filter
Top Products
4 – Managing Switches
Displaying Switch Information
4-10 59022-11 A
0
Interop Mode Zoning merge status. When a zone set is activated on an
FC-SW-2 compliant switch, only the active zone set is
propagated to all switches in the fabric. When a zone set
is activated on a non-FC-SW-2 compliant switch, the
active zone set and all inactive zone sets (the entire
zoning database) are stored in permanent memory. The
Interop Mode setting must be the same on all switches in
the fabric, otherwise the inter-switch links will not connect.
Legacy Address Format Legacy port addressing status. Enabled only for
interoperability with non-FC-SW-2 compliant switches.
Interop Auto Save Zoning auto save status. Saves zoning updates in
temporary memory and the zoning database (True) or
only in temporary memory (False).
Zoning Default Visibility Zoning visibility status. Permits (All) or prevents (None)
communication between attached devices in the absence
of an active zone set.
Security Auto Save N/A - does not apply to this switch
Security Fabric Binding
Enable
N/A - does not apply to this switch
Temperature Internal switch temperature °C
Fan 1 Status Fan 1 status
Fan 2 Status Fan 2 status (SANbox2-16 only)
Fan 3 Status Fan 3 status (SANbox2-64 only)
Power Supply 1 Status Power supply 1 status
Power Supply 2 Status Power supply 2 status (SANbox2-16 only)
Beacon Status Beacon status. Switch LEDs are blinking (On) or not (off).
Broadcast Support Broadcast support status. Broadcast support is enabled or
disabled (default).
In-band Enabled In-band management status. Permits (True) or prevents
(False) a switch from being managed over an ISL.
Temperature Failure Port
Shutdown
Non-configurable (always enabled for this switch). All
ports are downed when the switch temperature exceeds
the Failure Temperature.
Table 4-2. Switch Data Window Entries (Continued)
Entry Description