Filter
Top Products
4 – Managing Switches
Displaying Hardware Status
59022-11 A 4-41
0
3. Click the Start button to begin the firmware load process. You will be shown
a message warning you that the switch will be reset in order to activate the
firmware.
4. Click the OK button to continue firmware installation or click the Cancel
button to cancel the firmware installation.
4.13
Displaying Hardware Status
A switch is equipped with the following chassis LEDs that provide hardware status
information:
Chassis Over Temperature LED - indicates the temperature status of the
switch.
Fan Fail LED - indicates operational status of both fans.
Heartbeat LED - indicates the status of the internal switch processor and the
results of the power-on self test (POST).
Input Power LED - indicates the voltage status of the switch.
In the SANbox2-8c and SANbox2-16 faceplate displays, you can display a
summary of this status information by placing the cursor on the chassis LED
cluster as shown in Figure 4-16. Refer to the installation guide for your switch for
more information about the chassis LEDs.
Figure 4-16. Hardware Status LEDs