Filter
Top Products
3 – Managing Fabrics
Zoning a Fabric
3-44 59022-11 A
0
3.7.3.2
Configuring the Zoning Database
Use the Zoning Config dialog to change the Auto Save, Default Visibility, and
Discard Inactive configuration parameters. In the faceplate display, open the
Zoning menu and select Edit Zoning Config to open the Zoning Config dialog
shown in Figure 3-16. After making changes, click the OK button to put the new
values into effect.
Figure 3-16. Zoning Config Dialog
Switch port icon – not logged in
Switch port icon – logged in
NL_Port (loop) device icon – logged in to fabric
NL_Port (loop) device icon – not logged in to fabric
N_Port device icon – logged in to fabric
N_Port device icon – not logged in to fabric
Table 3-4. Edit Zoning Dialog Tool Bar Buttons and Icons (Continued)
Tool Bar Button Description