Filter
Top Products
Remote Maintenance by telnet
87
9
The following is a sample configu-
ration using the registration
number 3 with the IP address
192.168.15.16:
msh> snmp 3 ip 192.168.15.16
The following is a sample configu-
ration using the registration
number 3 with the IPX address
7390A448, and the MAC address
00:00:74:62:5C:65:
msh> snmp 3 ipx 7390A448:0000
IPP
Use the “ipp” command to configure
IPP settings.
❖
❖❖
❖ Viewing setting
The following command displays
the current IPP setting:
msh> ipp
Example output:
timeout=900(sec)
auth=off
• The “timeout” setting specifies
how many seconds the compu-
ter keeps trying to access the
network printer to send print
jobs if no connection can be
made.
• The “auth” setting indicates the
user authentication mode.
❖
❖❖
❖ IPP timeout configuration
Specify how many seconds to wait
before canceling a print job if it has
been interrupted for some reason.
The time can be from 30 to 65535
seconds.
msh> ipp timeout {30 - 65535}
❖
❖❖
❖ IPP user authentication configuration
Use IPP user authentication to re-
strict printing with IPP to certain
users. The default is “off”.
msh> ipp auth {basic|di-
gest|off}
•“basic” and “digest” are user
authentication settings.
•“off” removes the user authenti-
cation.
Note
❒ If you select “basic” or “digest”,
see next section “Configuring
IPP user authentication” for
how to configure the user name.
Up to ten user names are availa-
ble.
❖
❖❖
❖ Configuring IPP user authentication
Use the following command:
msh> ipp user
The following message appears:
Input user number (1 to 10):
Enter the number, user name, and
password.
IPP user name:user1 IPP
password:*******
After configuring, the following
message appears:
IPP configuration changed.
Direct printing port
The direct printing port allows print-
ing directly from a computer, con-
nected to the network, to the printer.
Use the “diprint” command to
change direct printing port settings.
❖
❖❖
❖ View settings
The following command displays
the current direct printing port set-
tings:
msh> diprint