Filter
Top Products
Appendix
104
9
Machine Status and Configuration
You can check the machine status and configuration using telnet or UNIX.
❖
❖❖
❖ telnet
Use the “info” or “status” command.
❖
❖❖
❖ UNIX
Use the “lpr” or “lpstat” command, or “stat”, “info” parameter of rsh, rcp, or ftp.
Machine status
Status Description
Call Service Center Call service center and ask for assistance.
Cover Open: Front Cover The machine’s front cover is open.
Cover Open: Lower Right Cover The machine’s lower-right cover is open.
Cover Open: Right Cover The machine’s center-right cover is open.
Cover Open:Internal Tray2 Exit The machine’s internal tray exit is open.
Empty: Toner Toner has run out.
Energy Saver Mode The machine is standing by in Energy Saver
mode.
Error: Ethernet Board An Ethernet board error has occurred.
Error: IEEE1394 Board An IEEE 1394 board error has occurred.
Error: Memory Switch Memory switch data is corrupt.
Error: Parallel I/F Board A parallel interface board error has occurred.
Error: USB Interface A USB interface board error has occurred.
Error: Wireless Card Wireless card is not inserted.
Error: Wireless Card or Board A wireless card or wireless board error has oc-
curred.
Error: Optional Font An optional font error has occurred.
Error: DIMM Value A DIMM value error has occurred.
In Use: Input Tray Paper tray is in use.
Key Card not inserted The machine is waiting for key card to be in-
serted.
Key Counter not inserted The machine is waiting for key counter to be
inserted.
Low: Toner Toner has almost run out.
Malfunction: Ext. Charge Unit There is a problem with the external charge
unit.