Filter
Top Products
T
ROUBLESHOOTING
8.16
Retry Redial?
(only for
SCX-6320F
)
The machine is waiting
for a specified time
interval to redial a
previously busy station.
You can press
Start
to redial
immediately, or
Stop/Clear
to cancel the redial operation.
Scanner Locked
The scan module is
locked.
Unlock the scanner (see
page 1.2) and press
Stop/
Clear
.
Toner Empty
The toner cartridge has
run out. The machine
stops.
Replace the old cartridge with
new one. See page 7.3.
Replace Toner
Toner Low
The toner is almost
empty.
Take out the toner cartridge
and gently shake it. By doing
this, you can temporarily re-
establish printing operations.
DUPLEX JAM
When the machine
detected the duplex jam
in the middle of 2-sided
printing.
Remove the jammed paper
Function Impossible
Means that these modes
can not be worked
together or not
supported in your
current machine
configurations.
In case of copying, try again
without function combination
.For Scan-To-Email, please
check secured connection of
the DIMM and QWERTY
keyboard
DIMM not installed
Not installed the DIMM
for Fax then will be
displayed this message
on the LCD.
Check the DIMM in the
expanding memory slot.
*Please test the RAM testing in
engine test mode. *If the
problem in DIMM, replace the
DIMM.
NETWORK IP Conflict
An IP Conflict occurs
when your MFP’s
network settings are
configured incorrectly.
Correct the network settings.
Not Assigned
Not Assigned. The
Group Mail you tried to
use has no email
assigned to it.
Type the email manually with
the QWERTY Keyboard/
Numeric key pad, or assign the
email.
Display Meaning Solution