Filter
Top Products
I
NSTALLING
O
PTIONS
D.8
Configuring Network Parameters
To use your machine as a network printer, you need to set up
the desired network protocols on the machine. Setting protocols
can be accomplished by using the supplied network programme.
Please refer to SyncThru User’s Guide.
You can configure the basic network parameters through the
control panel of your machine. Use the control panel to do the
following:
• Enable or disable network protocols; TCP/IP, IPX/SPX
(Netware)
•Configure TCP/IP
• Configure IPX frame types
Supported Operating Systems
• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Item Requirements
Network Interface 10/100 Base-TX
Network Operating
System
• Novell NetWare 4.x, 5.x, 6.x, and
above
• Windows 95/98/Me/XP, NT 4.0/2000
• Unix AT&T, BSD4.3, HP-UX, SUN OS,
SOLARIS, SCO
• Various Linux OS
• Maccintosh OS 8.6~9.2, 10.1~10.3
(Option)
Network Protocols • Netware IPX/SPX
• IPX/SPX, TCP/IP, DLC/LLC on Windows
• Port9100 on Unix, Linux
Dynamic Addressing
Server
•DHCP, BOOTP