Filter
Top Products
T
ROUBLESHOOTING
8.22
Printing Problem Solution Chart
Condition Probable cause Suggested solutions
Your machine
does not print.
The IEEE-1284 parallel
cable or USB cable is
not connected properly.
Check the cable connection.
The IEEE-1284 parallel
cable or USB cable is
defective.
Check the cable with a computer
and printer to work. If print job is
still not possible, replace the cable.
The port setting is
incorrect.
Check the printer settings in the
Windows Control Panel to make
sure that the print job is being sent
to the correct port. (For Example:
LPT1.)
Your machine
does not print.
(continued)
The toner and drum
cartridges are not
installed properly.
Check that the toner and drum
cartridges are installed properly.
The printer driver may
not be installed
properly.
Reinstall the software.
The parallel port cable
specifications may not
be correct.
Use the IEEE-1284 parallel port
cable supplied with the machine or
replace it with an IEEE-1284
compliant cable.
Half of the page is
blank.
The page layout is too
complex.
Reduce the resolution setting from
600 dpi to 300 dpi. Install more
RAM in the computer.
The page orientation
may be incorrect.
Change the page orientation in the
printer setup dialogue.