Filter
Top Products
C
OPYING
4.11
4
Using Copy Menu Features
Changing Default Settings
Copy options, including darkness, original type and copy size,
can be set to the most frequently used modes. When you copy
a document, the default settings are used unless they are
changed by using the corresponding buttons on the control
panel.
To create your own default settings:
1
To enter Change Default feature, press
Menu
until you see
“Copy Features” on the top line of the display.
The first menu item, “Change Default”, appears on the
bottom line.
2
Press
Enter
to access the menu item.
3
Press the
scroll
buttons to scroll through the setup options.
4
When the option you want to set appears, press
Enter
to
access the option.
5
Change the setting using the
scroll
buttons.
6
Press
Enter
to save the selection.
7
Repeat steps 3 through 6, as needed.
8
To return to Standby mode, press
Stop/Clear
.
Creating Margin Shifts
The Margin Shift feature allows you to create a binding edge for
the document. The image can be adjusted up or down on the
page and/or shifted to the right or left.
1
Load the document to be copied on the document glass,
and close the cover.