Filter
Top Products
A
DDITIONAL
F
EATURES
10.3
10
For details, see “Using the Local Address Book” on page 9.2
and “Using the Global Address Book” on page 9.7.
When a set of characters or numbers is entered, the user
can press
Address Book
and select “Local” or “Global”. The
closest matching entries are shown.
8
Enter the name of the recipient and then press
Enter
. If the
e-mail address is taken from the Address Book then this
field can not be edited.
9
When the display shows “Another Address?”, select “Add”
and then press
Enter
.
When you finish adding the addresses, select “Done” when
the display shows “Another Address?” and then press
Enter
.
10
Repeat steps 7 through 9 to add additional addresses in the
group.
11
To return to idle mode, press
Stop/Clear
.
Deleting a Group
1
Refer to steps from 1 to 3 on page 10.2.
2
Press the scroll buttons until “Delete” displays on the
bottom line and then press
Enter
.
3
Enter the group number you want to delete and then press
Enter
. If the group number is not configured, the “Not
Configured” error message will be displayed.
4
When the confirming message appears, select “Yes” and
then press
Enter
. The selected group will be deleted.
Selecting “No” will take you back to step 3.
5
If you want to delete another group, repeat steps 2 through
4. To return to idle mode, press
Stop/Clear
.